To Make this Rig
For the rig body, you will need;
1 x Link Clip
2 x Mini-Crimp
2 x 3mm Bead
1 x SRT Spring
1 x 200mm Boom
1 x ABC Link Clip
1 x approx. 1130mm length 60lb
main line (for 830mm body)

You will also need;
1 x 500mm snood

The Rig Body

1. Attach the bait clip to the ABC Link Clip, tie the clip onto your line and thread on the rest of the components in this order.

2. Tie on the top Link Clip, ensuring the main line is at 830mm.

3. Hang the rig from a peg, attach a sinker and locate the ABC clip in the slider

4. Clip the snood onto the boom.

5. Hold the sinker down firmly and, with a pair of pliers, push the crimp that is under the lower spring assembly up the main line until the spring is fully compressed and secure it.

6. Let go of the sinker whilst ensuring the hook remains in the bait clip, which will allow the spring to slightly decompress. Allow the top bead to rest on the boom and without compressing the spring further, secure the top crimp immediately above the bead (This will ensure enough pressure on the boom to hold it out.)