Shown with system 100+ 150g flat back sinker - available separately
| Line |
1200mm |
60lb |
| Snoods |
250mm |
25lb
|
| (with 100mm boom giving combined reach of 350mm) |
| Hooks |
Aberdeen |
# 1 |
|
The booms on this three hook paternoster giving a virtually tangle free rig that lays on the sea bed, making it excellent for targetting 'flatties'. Suitable to use from a boat, pier or beach and is ideal for estuary fishing!
Optional silicone stand off's included.
Sinker not included.
To Make this Rig
For the rig body, you will need;
2 x Link Clips
6 x Mini-Crimps
6 x 3m Beads
3 x 100mm Booms
1 x approx. 1500mm length 60lb main line (for 1200mm body)
You will also need;
3 x 250mm snood
The Rig Body
1. Tie on the bottom Link Clip and thread on the rest of the components in this order.
| |
LowerAss'y |
Middle Ass'y |
Upper Ass'y |
|
|
crimp |
3mm bead |
3mm bead |
3mm bead |
boom |
boom |
boom |
3mm bead |
3mm bead |
3mm bead |
crimp |
crimp |
crimp |
2. Tie on the top Link Clip, ensuring the main line is at 1200mm.
3. Hang the rig from a peg and attach a sinker.
4. Clip the snoods onto the booms.
5. Position the top mini-crimp just below the top Link Clip and secure. Position the second mini-crimp, with 3mm beads and boom, below the first and, ensuring the eye of the snood boom is tightly entrapped between the two 3mm beads, secure.
6. Position tthe next mini-crimp approx. 360mm below upper snood assembly and secure. With the next mini-crimp tightly trap the second boom between the 3mm beads and secure.
7. Position the next mini-crimp approx 360mm below middle snood assembly and secure. Again ensuring tthey eye of the boom is tightly entrapped between the 3mm beads, secure the remaining crimp. |
