| Line |
830mm |
60lb |
| Snoods |
350mm |
35lb |
| Hooks |
Viking |
# 2/0 |
|
This clip down rig uses a Bent Rig & Link Clips and SRT springs in series, so that when the ABC Clip releases the first snood, the upper snood follows. Excellent clip down distance paternoster for cod.
Sinker not included.
To Make this Rig
For the rig body, you will need;
1 x Link Clip
4 x Mini-Crimps
4 x 3mm Beads
2 x 45lb Snood Swivels
2 x SRT Springs
1 x Bent Rig Clips
1 x ABC Link Clip
1 x approx. 1130mm length 60lb main line (for 830mm body)
You will also need;
2 x 350mm snood
The Rig Body
1. Clip one of the swivels onto the bent rig clip.
2. Attach the bait clip to the ABC Link Clip, tie the clip onto your line and thread on the rest of the components in this order;
| |
lower ass'y
ABC slider
crimp
spring
3mm bead
bent rig clip
3mm bead
crimp
|
upper ass'y
crimp
spring
3mm bead
45lb swivel
3mm bead
crimp
|
3. Tie on the top Link Clip, ensuring the main line is at 830mm.
4. Hang the rig from a peg, attach a sinker and locate the ABC clip in the slider
5. Clip a snood onto the lower swivel and put the hook in the bait clip.
6. Hold the sinker down firmly and, with a pair of pliers, push the crimp that is under the 1st spring assembly up the main line until the spring is 2/3 compressed and secure it.
7. Release the hook from the bait clip, to de-compress the spring, let the bead and crimp above the swivel rest on it and secure the crimp.
8. Clip on the upper snood, locate the lower snood in the ABC clip and put the upper snood hook in the lower bent rig clip and repeat sections 6 & 7.
|
