Shown with system 100+ 150g flat back sinker - available separately

To Make this Rig
For the rig body, you will need;
1 x Link Clip
1 x 45lb swivel
2 x SRT Spring
4 x 3mm Bead
1 x SRT Pulley Clip
1 x ABC Link Clip (with slider)
2 x 4mm Power Beads
1 x 150mm Genie Handi-tube boom
1 x 80lb Main Line Swivel
1 x approx. 1300mm length 60lb main line (for 1000mm body)

You will also need;
2 x 700mm snood


The Rig Body

1. Tie on the 80lb main line swivel and thread on the rest of the components in this order.

2. Tie on the top Link Clip, ensuring the line is approx. 830mm long.

3. Hang the rig from a peg by the top Link Clip and attach a sinker onto the free running ABC Link Clip.

4. Locate the ABC bait clip in the slider and attach the snood to the main line swivel.

5. Locate the hook in the bait clip and lay the snood line through the pulley clip.

6. Hold the sinker down firmly and, with a pair of pliers, push the crimp that is under the spring assembly up the main line until the spring is 2/3 compressed and secure it.

7. Release the hook, and with the crimp above the assembly, compress until the spring is 3/4 of its original length and secure.

8. Attach the upper snood to the 45lb swivel and locate the hook in the bait clip.

9. Hold the sinker down firmly and, with a pair of pliers, push the crimp that is under the spring assembly up the main line until the spring is 2/3 compressed and secure it.