|
|
 |
|
| Shop for the following items: |
|
|
|
| |
| |
|
|
|
 |
|
|
|
| Welcome
to Viscount Tackle's website for fishing !! |
|
|
 |
|
 |
|
Basic Single Hook Clip Down - R001
|
Shown with system 100+ 150g flat back sinker - available separately
| Line |
830mm |
60lb |
| Snood |
700mm |
25lb |
| Hook |
Viking |
#2/0 |
|
This is a simple distance clip down rig using a Rig Clip to hold the bait close behind the weight. The snood is kept taught by an adjustable silicone stop knot, taking some of the strain. (Sinker not included)
A good general purpose rig!
To Make this Rig
For the rig body, you will need;
1 x Link Clip
3 x 3mm Beads
1 x 45lb snood Swivel
1 x Mini-Crimps
1 x 6mm of 1.5mm silicone tubing
1 x Rig Clip
1 x approx 1130mm length 60lb main line (for 830mm body)
You will also need;
1 x 700mm snood
The Rig Body
1. Tie on the Rig Clip and thread on the rest of the components in this order;
| |
crimp
3mm bead
silicone stop knot 3mmbead
svivel
3mm bead
|
|
2. Tie on the Link Clip, ensuring the line is approx. 830mm long.
3. Hang the rig from a peg and attach a sinker
4. Clip the snood onto the swivel
5. Locate the hook in the bait clip holding the sinker down firmly, position the silicone stop knot (together with the beads, snood swicel & crimp) up the main line until the snood line is taught. remember to keep the knot well lubricated!
6. Secure the lower crimp approx 300mm below the sliding stop knot.
Please Note: After each cast the snood will need re-tightening with the silicone stop knot. |
|
|
|
|
 |
|
 |
|
|
|
|
|
|
|
|
|
