This popular two hook distance rig is suitable for most beach fishing.
Optional Silicone stand off's included. Sinker not included.
To Make this Rig
For the rig body, you will need;
1 x Link Clip
6 x 3mm Bead
2 x SRT Spring
2 x 45lb Snood Swivel
4 x Mini-Crimp
1 x short ABC clip
1 x long ABC Link Clip
1 x 80lb Main Line Swivel
1 x approx. 1130mm length 60lb main line (for 830mm body)
You will also need:
1 x 700mm snood
1 x 500mm snood
The Rig Body
Attach the long bait clip to the ABC Link Clip and tie onto your line and thread on the rest of thr components in this order.
| |
3mm bead
short bait clip
3mm bead
crimp
ABC slider
crimp
SRT spring
3mm bead
|
swivel
3mm bead
crimp
crimp
SRT spring
3mm bead
swivel
3mm bead
|
|
2. Tie on the top Link Clip, ensuring the main line is approx. 830mm.
3. Hang the rig from a peg and attach a sinker.
4. allow the bottom two 3mm. beads and short bait clip to rest on the knot and secure the crimp 5mm above the top bead.
5. Locate the ABC clips in the slider.
6. Clip the lower 500mm snood onto the first swivel and locate the hool in the lower bait clip.
7. Hold the sinker down firmly and, with a pair of pliers, push the crimp that is under the spring assembly up the main line until the spring is 3/4 compressed and secure it.
8. Allowing the 3mm bead and crimp above to rest on the swivel, secure the crimp.
9. Clip the 70mm snood onto the other swivel and locate the hook in the upper bait clip.
10 Repeat step 7 for the upper SRT assembly.
|
