|
|
 |
|
| Shop for the following items: |
|
|
|
| |
| |
|
|
|
 |
|
|
|
| Welcome
to Viscount Tackle's website for fishing !! |
|
|
 |
|
 |
|
Two Hooks Flapper - R008
|
Shown with system 100+ 150g flat back sinker - available separately
| Line |
830mm |
60lb |
| Snoods |
350mm |
25lb |
| Hooks |
Aberdeen |
#1 |
|
The Two Hook Flapper is also based on the traditional rig design and again features an adjustable bottom snood. Also is an ideal rig for flatties.
(Also not shown but optional stand off sleeves are supplied).
Optional silicone stand off's included. Sinker not included.
To Make this Rig
For the rig body, you will need;
2 x Link Clips
3 x Mini-Crimps
4 x 3mm Beads
2 x 45lb Snood Swivels
2 x 6mm length of 1.5mm silicone tubing.
1 x approx. 1130mm length 60lb main line (for 830mm body)
You will also need;
2 x 350mm snood
The Rig Body
1. Tie on the bottom Link Clip and thread on the rest of the components in this order.
| |
lower ass'y |
upper ass'y |
| |
sliding stop knot
| crimp |
3mm bead |
3mm bead |
swivel |
swivel |
3mm bead |
3mm bead |
sliding stop knot |
crimp |
| |
crimp |
|
4. Clip the snoods onto the 45lb snood swivels.
5. Position the top mini-crimp just below the Link Clip and secure. Position the second mini-crimp, with snood assembly, below the first and, ensuring the eye of the snood swivel is tightly entrapped between the two 3mm beads secure.
6. Position the remaining mini-crimp approx. 360mm below upper snood assembly and secure. Ensuring the eye of the snood swivel is tightly entrapped between the 3mm beads by the stop knots, and position the snood assembly anywhere in the lower third section.
|
|
|
|
|
 |
|
 |
|
|
|
|
|
|
|
|
|
