|
|
 |
|
| Shop for the following items: |
|
|
|
| |
| |
|
|
|
 |
|
|
|
| Welcome
to Viscount Tackle's website for fishing !! |
|
|
 |
|
 |
|
Up & Over Ledger Rig (with boom)- R015
|
Shown with system 100+ 150g flat back sinker - available separately
| Line |
830mm |
60lb |
| Snood |
700mm |
25lb |
| Hook |
Viking |
# 2/0 |
|
An up & over running ledger rig similar to the R014 but includes a 150mm clipped up boom, to help avoid tangles upon retrieval.
Sinker not included.
To Make this Rig
For the rig body, you will need:
1 x Link Clip
2 x mini-Crimp
2 x 3mm Beads
1 x SRT Pulley Clip
1 x SRT Spring
1 x ABC Link Clip
2 x 4mm Power Beads
1 x 150mm Handi-tube boom
1 x 80lb Main Line Swivel
1 x approx. 1130mm length 60lb main line (for 830mm body)
You will also need:
1 x 700mm snood
The Rig Body
1. Tie on the 80lb main line swivel and thread on the rest of the components in this order.
| |
4mm power bead |
spring |
handi-tube boom |
3mm bead |
4mm power bead |
SRT Clip |
AC Link Clip |
3mm bead |
| |
Slider |
crimp |
| |
crimp |
|
2. Tie on the top Link Clip, ensuring the line is approx. 830mm long.
3. Hang the rig from a peg by the top Link Clip and attach a sinker onto the free running ABC Link Clip.
4. Locate the ABC bait clip in the slider and attach the snood to the main line swivel.
5. Locate the hook in the bait clip and lay the snood line through the pulley clip.
6.Hold the sinker down firmly and, with a pair of pliers, push the crimp that is under the spring assembly up the main line until the spring is 2/3 compressed and secure it.
7. Release the hook, and with the crimp above the assembly, compress until the spring is 3/4 of its original length and secure. |
|
|
|
|
 |
|
 |
|
|
|
|
|
|
|
|
|
