|
|
 |
|
| Shop for the following items: |
|
|
|
| |
| |
|
|
|
 |
|
|
|
| Welcome
to Viscount Tackle's website for fishing !! |
|
|
 |
|
 |
|
Up & Over Ledger Rig - R014
|
Shown with system 100+ 150g flat back sinker - available separately
| Line |
830mm |
60lb |
| Snood |
1200mm |
25lb |
| Hook |
Viking |
# 2/0 |
|
An up & over running ledger rig with a fine, long flowing hook length. The power from the cast stops at the main line swivel and with the use of the SRT Clip, the stress on the hook length during the cast is sompensated for, making this rig suitable for distance casting.
Sinker not included.
To Make this Rig
For the rig body, you will need;
1 x Link Clip
2 x mini-Crimp
2 x 3mm Beads
1 x SRT Pulley Clip
1 x SRT Spring
1 x ABC Link Clip
1 x 4mm Power Beads
1 x 80lb Main Line Swivel
1 x approx. 1130mm length 60lb main line (for 830mm body)
You will also need:
1 x 1230mm snood
The Rig Body
1. Tie on the 80lb main line swivel and thread on the rest of the components in this order.
| |
4mm power bead |
3mm bead |
ABC Link Clip |
SRT Clip |
red slider |
3mm bead |
crimp |
crimp |
| |
SRT Spring |
|
2. Tie on the top Link Clip
3. Hang the rig from a peg by the top Link Clip and attach a sinker onto the free running ABC Link Clip.
4. Locate the ABC bait clip in the slider ans attach the snood to the main line swivel.
5. Locate the hook in the bait clip and lay the snood line through the pulley clip.
6.Hold the sinker down firmly and, with a pair of pliers, push the crimp that is under the spring assembly up the main line until the spring is 2/3 compressed and secure it.
7. Release the hook, and with the crimp above the assembly, compress until the spring is 3/4 of its original length and secure. |
|
|
|
|
 |
|
 |
|
|
|
|
|
|
|
|
|
